Tuesday, January 3, 2017

An update on mineral depletion: do we need mining quotas?



Currently, the problem of resource depletion is completely missing from the political debate. There has to be some reason why some problems tend to disappear from the public's radar as they become worse. Unfortunately, the depletion problem won't go away because the public is not interested in it. I discussed depletion in depth in my 2014 book "Extracted" and now Theo Henckens' updates the situation with this post based on his PhD dissertation “Managing Raw Materials Scarcity, Safeguarding the availability of geologically scarce mineral resources for future generations" (16 October 2016, University of Utrecht, The Netherlands). The full dissertation can be downloaded via the link http://dspace.library.uu.nl/handle/1874/339827.  (UB)



Scarce minerals are running out: mining quotas are needed
by Theo Henckens

To ensure that sufficient zinc, molybdenum and antimony are available for our greatgrandchildren’s generation, we need an international mineral resources agreement.

Molybdenum is essential for the manufacture of high-grade stainless steels, but at present molybdenum is hardly recycled. Yet unless reuse of molybdenum is dramatically increased, the extractable reserves of molybdenum on Earth will run out in about eighty years from now. The extractable reserves of antimony, a mineral used to make plastics more heat-resistant, will run out within thirty years.

During more than a century the use of mineral resources increased exponentially with an average between 3 and 4% annually. Can this go on, given the limited amounts of mineral resources in the earth’s crust?

TRENDS IN THE ANNUAL EXTRACTION OF SEVEN COMMODITIES



Which raw materials or minerals are scarce?

A mineral’s scarcity is expressed as the number of years that its extractable amount in the Earth's crust is sufficient to meet anticipated demand. This exhaustion period is estimated from the annual use of such mineral. I calculated the ratio between the extractable amount and the annual consumption for 65 mineral resources. My calculation is based on what is considered to be maximally extractable from the Earth’s crust. These “Extractable Global Resources” are derived from a study by the International Resource Panel of UNEP (United Nations Environmental Program) in 2011. Regarding the annual use of mineral resources I have supposed an annual growth of 3% until 2050, where after I have supposed that extraction stabilizes. The table below shows the top ten scarcest mineral resources.


TOP TEN SCARCE MINERAL RESOURCES




Exhaustion period (in years) of remaining extractable mineral resources
Important applications
Antimony
30
Flame retardants
Gold
40
Electronic components
Zinc
80
Corrosion protection
Molybdenum
80
High-grade steels
Rhenium
100
High-quality alloys
Copper
200
Electricity grid
Chromium
200
Stainless steels
Bismuth
200
Pharmaceuticals and cosmetics
Boron
200
Glasswool
Tin
300
Tins, brass



What is a sustainable extraction rate?

In my dissertation I have defined a sustainable extraction rate as follows: “The extraction of a mineral resource is sustainable, if a world population of nine billion people can be provided with that mineral resource during a period of thousand years, supposing that the average use per world citizen is equally divided over the countries of the world”. Actually, the concept of sustainability is only applicable to an activity, which can continue forever. Concerning the extraction of mineral resources, I consider a thousand years as a reasonable approach. This is arbitrary of course. But 100 years is too short. In that case we would accept that our grandchildren would be confronted with exhausted mineral resources.
A sensitivity analysis reveals that even if we assume that the extractable reserves in the Earth’s crust are ten times higher than the already optimistic assumption of the UNEP International Resource Panel, then the use of antimony, gold, zinc, molybdenum, and rhenium in industrialized countries would still have to be hugely reduced in order to preserve sufficient of these raw materials for future generations. This is particularly so if we want these resources to be more fairly shared among countries and people than is currently the case. There are also environmental and energy limits to the ever deeper and remoter search for ever lower concentrations of minerals. If we want to stretch out all the exhaustion periods in the table to 1000 years, then it can be calculated that the extraction of antimony should be reduced of 96 %, that of zinc of 82 %, that of molybdenum of 81 %, that of copper of 63 %, that of chromium of 57 % and that of boron of 44 %. This is compared to the extracted quantities in 2010. These reduction percentages are high. The question is whether that is feasible. Moreover, would the price mechanism not lead to a timely and sufficient extraction reduction of scarce mineral resources?


The price mechanism fails
One would suppose that the general price mechanism would work: the price of relatively scarce mineral resource rises quicker than the price of relative abundant mineral resources.

TRENDS IN THE REAL PRICE OF SCARCE AND NON-SCARCE MINERALS IN THE UNITED STATES 1900-2015*



* The minerals have been classified according to their scarcity. The scarce raw materials in the figure are antimony, zinc, gold, molybdenum and rhenium. The moderately scarce raw materials are tin, chromium, copper, lead, boron, arsenic, iron, nickel, silver, cadmium, tungsten and bismuth. The non-scarce raw minerals are aluminum, magnesium, manganese, cobalt, barium, selenium, beryllium, vanadium, strontium, lithium, gallium, germanium, niobium, the platinum-group metals, tantalum and mercury.

My research makes clear that the price of scarce mineral resources has not risen significantly faster than that of abundant minerals. I demonstrate in my dissertation that, so far, the geological scarcity of minerals has not affected their price trends. The explanation might be that the London Metal Exchange looks ahead for a maximum period of only ten years and that mining companies anticipate for up to thirty years. But we must look much further ahead if we are to preserve scarce resources for future generations.

Eventually, the price of the scarcest minerals will rise, but probably not until their reserves are almost exhausted and little remains for future generations.


Technological opportunities are not being exploited
Are the conclusions I reach over-pessimistic? After all, when the situation becomes dire, we can expect recycling and material efficiency to increase. The recycling of molybdenum can be greatly improved by selectively dismantling appliances, improved sorting of scrap metal and by designing products from which molybdenum can be easier recycled. Alternative materials with the same properties as scarce minerals can be developed. Antimony as a flame retardant can be replaced fairly easily by other flame retardants. Scarcity will drive innovation.

Thirty to fifty percent of zinc is already being recycled from end of life products, but although it is technologically possible to increase this percentage, this is barely happening. Almost no molybdenum is recycled. Recycling is not increasing because the price mechanism is not working for scarce minerals. In the absence of sufficient financial market pressure, how can technological solutions for recycling and substitution be stimulated?


What should happen?

I argue that what is needed is an international agreement: by limiting the extraction of scarce minerals stepwise, scarcity will be artificially increased – in effect, simulating exhaustion and unleashing market forces. This could be done by determining an annual extraction quota, beginning with the scarcest minerals. Such an international mineral resources agreement should secure the sustainable extraction of scarce resources and the legitimate right of future generations to a fair share of these raw materials. This means that agreement should be reached on reducing the extraction of scarce mineral resources, from 96 percent for antimony to 82 percent for zinc and 44 percent for boron, compared to the use of these minerals in 2010. In effect, such an agreement would entail putting into practice the normative principles that were agreed on long ago relating to the sustainable use of non-renewable raw materials, such as the Stockholm Declaration (United Nations, 1972), the World Charter for Nature (UN, 1982), and the Earth Charter (UNESCO, 2000). These sustainability principles were recently reconfirmed in the implementation report of Agenda 21 for Sustainable Development (United Nations, 2016).

Financial compensation for countries with mineral resources
Countries that export the scarce minerals will be reluctant to voluntarily cut back extraction because they would lose revenue. They should therefore receive financial compensation. The compensation scheme should ensure that the income of the resource countries does not suffer. In exchange, user countries will become owners of the raw materials that are not extracted, but remain in the ground. An international supervisory body should be set up for inspection, monitoring, evaluation and research.


Not a utopian idea
In my dissertation, I set out the case for operationalizing the fundamental principles for sustainable extraction of raw materials, which have been agreed in various international conferences and confirmed by successive conferences of the United Nations. The climate agreement, initially thought to be a utopian idea, has become reality, so there is no reason why a mineral resources agreement should not follow.



Antimony
More than 50% of the antimony annually sold is used in flame retardants, especially in plastics for electrical and electronic equipment. A third of this equipment currently contains antimony. In addition, more than a quarter of antimony sold annually is used in lead batteries. In principle, antimony in its application as a flame retardant can largely be replaced by other types of flame retardants and antimony containing lead batteries can be replaced by non-antimony containing batteries.

Gold
In addition to its use in jewelry and as security for paper money, gold is especially used in high-quality switches, connectors and electronic components.

Zinc
The main application of zinc is as a coating on another metal to protect it against corrosion. Other applications include brass, zinc gutters, rubber tires and as a micro-nutrient in swine feed.

Molybdenum
Almost 80% of the volume of molybdenum extracted per annum is used to manufacture high-grade steels that are mainly used in constructions exposed to extreme conditions such as high temperatures, salt water and aggressive chemicals. There are very few substitutes for the current applications of molybdenum, and molybdenum is difficult, though not impossible, to recycle.

Rhenium
Rhenium is mainly used in high-quality alloys, to enable them to withstand extreme temperatures. It is also used in catalysts, to give gasoline a higher octane number.

Rare Earth Metals
Scarce mineral resources should not be confused with the Rare Earth Metals that are mainly mined in China. The Rare Earth Metals are seventeen chemical elements with exotic names, such as praseodymium, dysprosium and lanthanum. The name "Rare Earths" dates from the early nineteenth century. Rare Earths are geologically not scarce, at least not if you compare their extractable global resources with their current annual usage. But of course, that could change in the future.




Who

Ugo Bardi is a member of the Club of Rome, faculty member of the University of Florence, and the author of "Extracted" (Chelsea Green 2014), "The Seneca Effect" (Springer 2017), and Before the Collapse (Springer 2019)